Does paper choice even matter?
For most people printing OMR sheets at home or in a shop, the honest answer is: less than you'd think, and mostly for reasons of durability rather than readability. If your sheets are going to be manually checked — which is how the vast majority of coaching-institute and self-practice OMR sheets are evaluated — plain white printer paper is completely fine. Paper thickness only starts to matter once you're printing for professional optical scanners, and even there, modern scanning software reads the surface image rather than sensing physical thickness.
What does matter regardless of who's checking the sheet: use plain white paper, not tinted or glossy stock. A glossy surface reflects light unevenly and can cause glare under a scanner or even a phone camera, and a tinted background reduces the contrast between the paper and a filled bubble.
GSM, in plain terms
GSM (grams per square metre) is just a measure of how heavy — and roughly how thick — a sheet of paper is. Standard office printer paper is usually 70–80 GSM, which is exactly the range recommended for everyday OMR printing. It's cheap, it feeds through printers reliably, and it's plenty opaque enough that ink from one side doesn't show through the other.
Higher GSM (90 GSM and up) isn't wrong, it's just unnecessary for most practice use — you're paying more per sheet for durability you don't need if the sheet is getting used once and then filed away or discarded.
When thicker paper is actually worth it
There are a few genuine cases where stepping up to 90–105 GSM makes sense:
- Sheets that get handled a lot — passed between students, invigilators and evaluators — before they're finally checked.
- Sheets that need to survive being transported or posted somewhere for evaluation.
- Sheets you plan to store for a while, where you want them to hold up physically over months.
Outside those situations, it's a nice-to-have, not a requirement.
Laser vs inkjet — does it change anything?
Laser printers fuse toner onto the page and produce a very consistent, dry-to-the-touch print the moment it comes out — this is generally the safer choice for anything that's going to be marked over with pen shortly after printing, since there's zero risk of the printed lines smudging. Inkjet is perfectly usable too, just give the sheet a minute before anyone starts filling it in, especially in humid weather, so the printed borders don't smear under a hand resting on the page.
A quick checklist before you print
- Plain white paper, no glossy or coloured stock.
- 70–80 GSM for normal practice use; step up only if the sheet needs to survive heavy handling.
- Print a single test copy first and check the bubbles are fully circular and not clipped at the page margins.
- If using inkjet, let the sheet dry fully before handing it out.
Frequently asked questions
Is 70 GSM too thin for an OMR sheet?
No — it's the most common weight used for self-printed and laser-printed OMR sheets and is perfectly fine for manual checking or most modern scanning software.
Does coloured paper affect OMR scanning?
It can, by lowering the contrast between the paper background and a filled bubble. Plain white is the safer default unless your specific scanning setup is calibrated for a coloured sheet.
Should I use photo paper for a sharper-looking sheet?
No — glossy photo paper causes glare and doesn't absorb ink or toner the way standard paper does, which can actually make bubbles harder to read, not easier.